FibroPool Pool Heater Specs — BTU Ratings & Efficiency Table
FibroPool pool heater datasheet summary: model-by-model BTU ratings, efficiency and COP from official sources, linked line by line — with sizing context against the industry formula.
Quick answer
FibroPool's published heater lineup covers 3 models across 1 product line (heat pump), spanning 20,000 to 55,000 BTU/hr. Heat pump figures are delivered heat output, rated at warm-air test conditions. Check any model against your pool's requirement with the BTU calculator.
Manufacturer datasheet · 2026-10-31FibroPool heater lineup at a glance
FibroPool leans efficiency-forward: its heat pump line carries COP figures up to 5.92 at warm-air test conditions. That matters most in mild climates — the heat pump vs gas calculator shows where the advantage ends.
Every figure below traces to an official FibroPool source (linked per table); anything the sources don't state is marked "(to be verified)" rather than guessed. To see whether a given BTU rating fits your pool, run the BTU calculator first.
FibroPool FH Series (Heat pump)
Direct-wired heat pumps sized for smaller pools; 120V models plug into standard outlets, COP stated per model by the brand.
| Model | Rated BTU/hr | Efficiency / COP | Notes |
|---|---|---|---|
| FH120 | 20,000 output | COP 4.81 | 120V, in-ground pools to ~5,000 gal; brand-stated COP 4.81. |
| FH135 | 35,000 output | COP 5.55 | 120V, pools to ~7,500 gal; brand-stated COP up to 5.55. |
| FH220 | 55,000 output | COP 5.92 | 240V; brand-stated fixed-speed COP range 4.81-5.92 across the line. |
How to read these specs against your pool
Heat pump ratings are heat output at warm-air test conditions; real output falls with air temperature, so shoulder-season swimmers size one step up. The heat pump vs gas calculator prices the difference at your rates.
Three practical checks before buying: first, confirm the required capacity with the BTU calculator (wind, shade and a solar cover move it); second, match the rating type — don't compare a gas input figure against a heat pump output figure; third, verify the exact model against the official FibroPool datasheet and your installer's gas-line or electrical assessment, because installation constraints, not the spec table, decide what can actually be connected.
Then estimate what the model costs to run in the running cost calculator. This page is independent — no affiliation with FibroPool; brand names are trademarks of their owners.
FAQ
Where do these FibroPool specifications come from?
Every figure is captured from FibroPool's own published material — official product pages, datasheets and installation manuals — with the source link shown under each table and a capture date. Nothing on this page comes from retailer listings or third-party claims about FibroPool products.
Why do some fields say "(to be verified)"?
When FibroPool doesn't publish a number for a field (a COP value, for example), this page leaves it marked "(to be verified)" instead of estimating it. The missing figure changes nothing about the ratings that are published — and the BTU calculator works from capacity, which every model states.
How do I compare FibroPool with another brand?
Compare the same rating type: input BTU/hr against input, output against output, and convert gas input to delivered heat at the stated efficiency. All brand pages on this site follow the same table format from the same capture discipline, so brand pages are directly comparable — that is the point of running them on one neutral site.
All heaters
Related pages